show services rpm history-results
Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 542: show services rpm history-results Output Fields
Field Name
Field Description
Probe owner.
Owner
Name of a test for a probe instance.
Test
Timestamp when the probe result was determined.
Probe received
Round trip time
Average ping round-trip time (RTT), in microseconds.
Probe results
Result of a particular probe performed by a remote host. The following
information is contained in the results:
Response received
—Average ping round-trip time (RTT), in microseconds.
Rtt
Copyright © 2010, Juniper Networks, Inc.
show services rpm history-results
<brief | detail>
<owner owner>
<since time>
<test name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display standard information about the results of the last 50 probes for each real-time
performance monitoring (RPM) instance.
none
—Display the results of the last 50 probes for all RPM instances.
—(Optional) Display the specified level of output.
brief | detail
owner owner
—(Optional) Display information for the specified probe owner.
—(Optional) Display information from the specified time. Specify time as
since time
yyyy-mm-dd.hh:mm:ss
—(Optional) Display information for the specified test.
test name
view
show services rpm history-results on page 4032
show services rpm history-results detail on page 4033
Table 542 on page 4031 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
—Timestamp when the probe result was determined.
Chapter 141: Real-Time Performance Monitoring (RPM)
.
show services rpm history-results
Level of Output
All levels
All levels
All levels
All levels
detail
4031