Show Class-Of-Service Forwarding-Class; Table 471: Show Class-Of-Service Forwarding-Class Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show class-of-service forwarding-class

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show class-of-service show class-of-service
forwarding-class forwarding-class
Copyright © 2010, Juniper Networks, Inc.
show class-of-service forwarding-class
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about forwarding classes, including the mapping of forwarding
classes to queue numbers.
view
Example: Configuring CoS on EX Series Switches on page 3401
Monitoring CoS Forwarding Classes on page 3456
Defining CoS Forwarding Classes (CLI Procedure) on page 3436
Configuring CoS Traffic Classification for Ingress Queuing on 40-port SFP+ Line Cards
(CLI Procedure) on page 3453
show class-of-service forwarding-class on page 3511
show class-of-service forwarding-class (EX8200 Switch) on page 3512
Table 471 on page 3511 describes the output fields for the
command. Output fields are listed in the approximate order in which
forwarding-class
they appear.

Table 471: show class-of-service forwarding-class Output Fields

Field Name
Forwarding class
ID
Queue
Policing priority
Fabric priority
user@switch> show class-of-service forwarding-class
Forwarding class
best-effort
expedited-forwarding
assured-forwarding
network-control
Chapter 119: Operational Commands for CoS
Field Description
Name of forwarding class.
Forwarding class identifier.
CoS queue mapped to the forwarding class.
Not supported on EX Series switches and can be ignored.
(EX8200 switches only) Fabric priority for the forwarding class,
either or . Determines the priority of packets ingressing the
high low
switch fabric.
ID
0
1
2
3
show class-of-service
Queue Policing priority
0 normal
5 normal
1 normal
7 normal
3511