Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3928

Complete Software Guide for Junos
Table 523: show ted database Output Fields (continued)
Field Name Field Description
Type of node. It can be either
Type
How long since the node was last refreshed, in seconds.
Age(s)
Number of nodes pointing toward this node.
LnkIn
Number of nodes to which this node points.
LnkOut
Protocol that reported the node information:
Protocol
IS-IS(1)
IS-IS(2)
OSPF (area-number)
Address on the far end of a link.
To
Address of the local interface being used to reach the remote node.
Local
Address of the interface on the remote node.
Remote
Metric Configured traffic engineering metric.
Static BW Total interface bandwidth in bps.
Reservable Subscription factor for the interface, which is the percentage of the link
bandwidth that can be used for the RSVP reservation process. You configure
bandwidth
this by including the
(Must include
Available BW
[priority] bandwidth actually reserved by RSVP for each priority level. The bandwidth
shown is for the entire interface, not for each individual LSP.
Bandwidth constraint model used by the LSPs.
Diffserv-TE BW
Model
(Must include the
Available BW
bandwidth actually reserved by RSVP for each traffic engineering class.
[TE-class]
Total interface bandwidth used by an MPLS traffic class, in bps.
Static BW
[CT-class]
3824
®
OS for EX Series Ethernet Switches, Release 10.4
(router) or
Rtr
—IS-IS Level 1.
—IS-IS Level 2.
—OSPF from the specified area.
statement when configuring RSVP.
subscription
statement when configuring LSPs) Amount of
diffserv-te
statement when configuring LSPs) Amount of
diffserv-te
(pseudonode).
Net
Copyright © 2010, Juniper Networks, Inc.
Level of Output
All levels
All levels
All levels
All levels
All levels
detail extensive
detail extensive
detail extensive
extensive
extensive
extensive
extensive
extensive
extensive
extensive