Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3854

Complete Software Guide for Junos
show connections
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
3750
®
OS for EX Series Ethernet Switches, Release 10.4
show connections
<brief | extensive>
<all | remote-interface-switch>
<down | up | up-down>
<history>
<labels>
<name>
<status>
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about the configured circuit cross-connect (CCC) connections.
—Display the standard level of output for all configured CCC connections on all
none
logical systems.
brief | extensive —(Optional) Display the specified level of output.
—(Optional) Display all connections.
all
down | up | up-down —(Optional) Display nonoperational, operational, or both kinds of
connections.
—(Optional) Display information about connection history.
history
labels —(Optional) Display labels used for transmit and receive LSPs.
—(Optional) Display information about the specified connection only.
name
remote-interface-switch —(Optional) Display remote interface switch connections only.
—(Optional) Display information about the specified connection only.
name
status —(Optional) Display information about the connection and interface status.
view
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
connections on page 3712
show connections on page 3751
show connections brief on page 3751
show connections down on page 3752
show connections extensive on page 3752
show connections history on page 3752
show connections labels on page 3752
Copyright © 2010, Juniper Networks, Inc.