Ping Mpls L2Vpn - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

ping mpls l2vpn

Syntax
Release Information
Description
Options
3732
®
OS for EX Series Ethernet Switches, Release 10.4
ping mpls l2vpn (instance instance-name local-site-id local-site-id-number remote-site-id
remote-site-id-number | interface interface-name)
<bottom-label-ttl>
<count count>
<destination address>
<detail>
<exp forwarding-class>
<logical-system (all | logical-system-name)>
reply-mode (application-level-control-channel | ip-udp | no-reply)
<size bytes>
<source source-address>
<sweep>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
The and options were introduced in Junos OS Release 9.6.
size sweep
The option and its suboptions are introduced in Junos OS Release 10.4R1.
reply-mode
Check the operability of MPLS Layer 2 virtual private network (VPN) connections. Type
Ctrl+c to interrupt a
ping mpls l2vpn
—(Optional) Display the time-to-live value for the bottom label in the
bottom-label-ttl
label stack.
—(Optional) Number of ping requests to send. If
count count
requests are sent. The range of values is
5 .
—(Optional) Specify an address other than the default (
destination address
for the ping echo requests. The address can be anything within the
—(Optional) Display detailed information about the echo requests sent and received.
detail
exp forwarding-class —(Optional) Value of the forwarding class for the MPLS ping packets.
instance instance-name local-site-id local-site-id-number remote-site-id
—Ping a combination of the Layer 2 VPN routing instance name,
remote-site-id-number
the local site identifier, and the remote site identifier, testing the integrity of the
Layer 2 VPN circuit (specified by the identifiers) between the ingress and egress
provider edge (PE) routers or switches.
—Ping an interface configured for the Layer 2 VPN on the egress
interface interface-name
PE router or switch.
logical-system (all | logical-system-name)
systems or on the specified logical system.
—(Optional) Reply mode for the ping request. This option has the following
reply-mode
suboptions:
application-level-control-channel
command.
count
through 1,000,000. The default value is
1
—(Optional) Perform this operation on all logical
—Reply using an application level control channel.
Copyright © 2010, Juniper Networks, Inc.
is not specified, five ping
)
127.0.0.1/32
127/8 subnet.