Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3424

Complete Software Guide for Junos
Table 430: Firewall Filter Statements That Are Not Supported by Junos OS for EX Series
Switches
Statements Not Supported
interface-set interface-set-name {
}
load-balance-group group-name {
}
three-color-policer name {
}
logical-interface-policer;
single-rate {
}
two-rate {
}
prefix-action name {
}
prefix-policer {
}
service-filter filter-name {
}
simple-filter simple-filter-name {
}
accounting-profile name;
logical-bandwidth-policer;
logical-interface-policer;
bandwidth-percent number;
Related
Documentation
3320
®
OS for EX Series Ethernet Switches, Release 10.4
Firewall Filter Match Conditions and Actions for EX Series Switches on page 3233
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3261
Configuring Firewall Filters (CLI Procedure) on page 3289
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3300
Firewall Filters for EX Series Switches Overview on page 3225
Statement Hierarchy Level
[edit firewall]
[edit firewall family family-name]
[edit firewall family family-name filter filter-name]
[edit firewall policer policer-name]
[edit firewall policer policer-name if-exceeding]
Copyright © 2010, Juniper Networks, Inc.