Chapter 140 Snmp; Configuring Snmp (J-Web Procedure) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

CHAPTER 140
SNMP
Configuring SNMP

Configuring SNMP (J-Web Procedure)

Table 532: SNMP Configuration Page
Field Function
Identification
Contact Free-form text string that specifies an administrative
Information contact for the system.
Copyright © 2010, Juniper Networks, Inc.
Configuring SNMP on page 3899
Configuration Statements for SNMP on page 3902
Operational Commands for SNMP on page 3963
Configuring SNMP (J-Web Procedure) on page 3899
You can use the J-Web interface to define system identification information, create SNMP
communities, create SNMP trap groups, and configure health monitor options for EX
Series switches.
To configure SNMP features:
Select >
1. Configure Services
Enter information into the configuration page for SNMP as described in Table 532 on
2.
page 3899.
To apply the configuration click
3.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes for details about all
commit options.
> .
SNMP
.
Apply
Commit Options
Your Action
Type contact information for the administrator of
the system (such as name and phone number).
> Commit . See Using the
3899