Table 521: Show Rsvp Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show rsvp statistics
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 521: show rsvp statistics Output Fields

Field Name Field Description
Packet Type Statistics about different RSVP messages.
Total Sent Total number of packets sent since RSVP was enabled.
Total Received Total number of packets received since RSVP was enabled.
Last 5 seconds Sent Total number of packets sent in the last 5 seconds.
Last 5 seconds Number of packets received in the last 5 seconds.
Received
Path Statistics about Path messages, which are sent from the RSVP sender along the data paths and
which store path state information in each node along the path.
Statistics about PathErr messages, which are advisory messages that are sent upstream to the sender.
PathErr
Statistics about PathTear messages, which remove path states and dependent reservation states in
PathTear
any routing devices along a path.
Copyright © 2010, Juniper Networks, Inc.
show rsvp statistics
<logical-system (all | logical-system-name)>
show rsvp statistics
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display Resource Reservation Protocol (RSVP) packet and error statistics.
—Display RSVP packet and error statistics.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear rsvp statistics on page 3728
show rsvp statistics on page 3819
Table 521 on page 3817 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 137: Operational Commands for MPLS
—(Optional) Perform this operation on all logical
show rsvp statistics
command.
3817