Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3446

Complete Software Guide for Junos
prefix-list
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3342
®
OS for EX Series Ethernet Switches, Release 10.4
prefix-list name {
ip-addresses;
apply-path path;
}
[edit dynamic policy-options],
[edit logical-systems logical-system-name policy-options],
[edit policy-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for configuration in the dynamic database introduced in Junos OS Release 9.5.
Support for configuration in the dynamic database introduced in Junos OS Release 9.5
for EX Series switches.
Support for the protocol family introduced in Junos OS Release 10.2.
vpls
Define a list of IPv4 or IPv6 address prefixes for use in a routing policy statement or
firewall filter statement.
You can configure up to 85,325 prefixes in each prefix list. To configure more than 85,325
prefixes, configure multiple prefix lists and apply them to multiple firewall filter terms.
name —Name that identifies the list of IPv4or IPv6 address prefixes.
—List of IPv4 or IPv6 address prefixes, one IP address per line in the
ip-addresses
configuration.
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Prefix Lists for Use in Routing Policy Match Conditions
Configuring Routing Policies and Policy Objects in the Dynamic Database
dynamic-db on page 3330
Copyright © 2010, Juniper Networks, Inc.