Mep (Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

mep (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
4102
®
OS for EX Series Ethernet Switches, Release 10.4
mep mep-id {
auto-discovery;
direction down;
interface interface-name;
remote-mep mep-id {
action-profile profile-name;
}
}
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the numeric identifier of the maintenance association end point (MEP) within
the maintenance association.
—Numeric identifier of the MEP.
mep-id
Range: 1 through 8191
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Copyright © 2010, Juniper Networks, Inc.