Monitoring Cos Scheduler Maps; Table 463: Summary Of Key Cos Rewrite Rules Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Meaning

Table 463: Summary of Key CoS Rewrite Rules Output Fields

Field
Rewrite Rule Name
CoS Value Type
Index
Forwarding Class
Loss Priority
Rewrite CoS Value To
Related
Documentation

Monitoring CoS Scheduler Maps

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
To monitor CoS rewrite rules in the CLI, enter the following command:
show class-of-service rewrite-rules
Table 463 on page 3459 summarizes key output fields for CoS rewrite rules.
Values
Names of rewrite rules.
Rewrite rule type:
—For IPv4 DiffServ traffic.
dscp
—For MPLS traffic.
exp
—For Layer 2 traffic.
ieee-802.1
inet-precedence —For IPv4 traffic.
Internal index for this particular rewrite rule.
Forwarding class that is used to determine
CoS values for rewriting in combination with
loss priority.
Loss priority that is used to determine CoS
values for rewriting in combination with
forwarding class.
Value that the CoS value is rewritten to.
Defining CoS Rewrite Rules (CLI Procedure) on page 3444
Defining CoS Rewrite Rules (J-Web Procedure) on page 3445
Example: Configuring CoS on EX Series Switches on page 3401
Use the monitoring functionality to display assignments of CoS forwarding classes to
schedulers.
To monitor CoS scheduler maps in the J-Web interface, select Monitor>Class of
Service>Scheduler Maps.
To monitor CoS scheduler maps in the CLI, enter the following CLI command:
show class-of-service scheduler-map
Table 464 on page 3460 summarizes key output fields for CoS scheduler maps.
Chapter 116: Verifying CoS Configuration
Additional Information
To display forwarding classes, loss priorities,
and rewritten CoS values, click the plus sign
(+).
Rewrite rules are applied to CoS values in
outgoing packets based on forwarding class
and loss priority setting.
3459