Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 4232

Complete Software Guide for Junos
Table 550: J-Web Ping Host Field Summary (continued)
Field Function
Don't Resolve Determines whether to display hostnames of the
Addresses hops along the path.
Interface Specifies the interface on which the ping requests
are sent.
Count Specifies the number of ping requests to send.
Don't Fragment Specifies the Don't Fragment (DF) bit in the IP
header of the ping request packet.
Record Route Sets the record route option in the IP header of the
ping request packet. The path of the ping request
packet is recorded within the packet and displayed
in the main pane.
Type-of-Service Specifies the type-of-service (TOS) value in the IP
header of the ping request packet.
Routing Instance Name of the routing instance for the ping attempt.
Interval Specifies the interval, in seconds, between
transmissions of individual ping requests.
Packet Size Specifies the size of the ping request packet.
Source Address Specifies the source address of the ping request
packet.
Time-to-Live Specifies the time-to-live (TTL) hop count for the
ping request packet.
Bypass Routing Determines whether ping requests are routed by
means of the routing table.
If the routing table is not used, ping requests are
sent only to hosts on the interface specified in the
Interface box. If the host is not on that interface,
ping responses are not sent.
Related
Documentation
4128
®
OS for EX Series Ethernet Switches, Release 10.4
Monitoring Interface Status and Traffic on page 1345
Your Action
To suppress the display of the hop hostnames,
select the check box.
To display the hop hostnames, clear the check
box.
Select the interface on which ping requests are sent
from the list. If you select any, the ping requests are
sent on all interfaces.
Select the number of ping requests to send from
the list.
To set the DF bit, select the check box.
To clear the DF bit, clear the check box.
To record and display the path of the packet,
select the check box.
To suppress the recording and display of the path
of the packet, clear the check box.
Select the decimal value of the TOS field from the
list.
Select the routing instance name from the list.
Select the interval from the list.
Type the size, in bytes, of the packet. The size can
be from 0 through 65468. The switch adds 8 bytes
of ICMP header to the size.
Type the source IP address.
Select the TTL value from the list.
To bypass the routing table and send the ping
requests to hosts on the specified interface only,
select the check box.
To route the ping requests using the routing table,
clear the check box.
Copyright © 2010, Juniper Networks, Inc.