Polling-Interval - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

interfaces
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
interfaces interface-name {
disable;
polling-interval seconds;
sample-rate {
egress number;
ingress number;
}
}
[edit protocols sflow]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure sFlow network traffic monitoring on the specified interface on the switch. You
can configure sFlow parameters such as polling interval and sample rate with different
values on different interfaces, and you can also disable sFlow monitoring on individual
interfaces.
The remaining statements are explained separately.
—Name of the interface on which to configure sFlow parameters.
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 64
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
Chapter 139: sFlow Monitoring Technology
3889