Show Firewall Log; Table 433: Show Firewall Log Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show firewall log

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
3356
®
OS for EX Series Ethernet Switches, Release 10.4
show firewall log
<detail>
<interface interface-name>
<logical-system (logical-system-name | all)>
show firewall log
<detail>
<interface interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.3.
logical-system
Display log information about firewall filters.
none —Display log information about firewall filters.
—(Optional) Display detailed information.
detail
interface interface-name —(Optional) Display log information about a specific interface.
logical-system (logical-system-name | all)
systems or on a particular system.
view
show firewall log on page 3357
show firewall log detail on page 3357
Table 433 on page 3356 lists the output fields for the
fields are listed in the approximate order in which they appear.

Table 433: show firewall log Output Fields

Field Name
Time of Log
Filter
—(Optional) Perform this operation on all logical
show firewall log
Field Description
Time that the event occurred.
Name of a filter that has been configured with the
at the hierarchy level.
[edit firewall]
A hyphen ( - ) indicates that the packet was handled by the Packet
Forwarding Engine.
A space (no hyphen) indicates the packet was handled by the
Routing Engine.
The notation pfe indicates packets logged by the Packet
Forwarding Engine hardware filters.
command. Output
statement
filter
Copyright © 2010, Juniper Networks, Inc.