Clear Firewall - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

clear firewall

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
clear firewall (all) clear firewall (all)
clear firewall (counter
counter-name)
clear firewall (filter
filter-name)
Copyright © 2010, Juniper Networks, Inc.
clear firewall
<all>
<counter counter-name>
<filter filter-name>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Clear statistics about configured firewall filters.
none —Clear the packet and byte counts for all firewall filter counters and clear the packet
counts for all policer counters.
—(Optional) Clear the packet and byte counts for all firewall filter counters and clear
all
the packet counts for all policer counters.
—(Optional) Clear the packet and byte counts for the specified
counter counter-name
firewall filter counter.
filter filter-name —(Optional) Clear the packet and byte counts for the specified firewall
filter.
clear
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3261
Verifying That Firewall Filters Are Operational on page 3311
Verifying That Policers Are Operational on page 3312
Firewall Filters for EX Series Switches Overview on page 3225
Understanding the Use of Policers in Firewall Filters on page 3259
user@host> clear firewall all
user@host> clear firewall counter port-filter-counter
user@host> clear firewall filter ingress-port-filter
Chapter 112: Operational Commands for Firewall Filters
3349