Table 507: Show Link-Management Te-Link Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show link-management te-link
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 507: show link-management te-link Output Fields

Field Name Field Description
Traffic-engineered link name.
TE link name
State State of the traffic-engineered link:
Local identifier Identifier of the local side of the link.
Remote identifier Identifier of the remote side of the link.
Local address Address of the local side of the link.
Remote address Address of the remote side of the link.
Encoding Physical layer media type determined by the interfaces contained in the traffic-engineered link. Typical
values include
Copyright © 2010, Juniper Networks, Inc.
show link-management te-link
<brief | detail>
<name name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display the resources used to set up Multiprotocol Label Switching (MPLS)
traffic-engineered forwarding paths.
none —Display information for all traffic-engineered links.
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display information for the specified traffic-engineered link only.
name name
view
show link-management on page 3754
show link-management peer on page 3758
show link-management routing on page 3760
show link-management statistics on page 3763
show link-management te-link on page 3766
Table 507 on page 3765 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
,
SDH/SONET Ethernet
Chapter 137: Operational Commands for MPLS
Up or Down.
, , and .
Packet PDH
show link-management te-link
3765