Interval - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

interval

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
interval
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3924
®
OS for EX Series Ethernet Switches, Release 10.4
interval seconds;
[edit snmp rmon history]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the interval over which data is to be sampled for the specified interface.
1800 sec
—Interval at which data is to be sampled for the specified interface.
seconds
snmp—To view this statement in the configuration.
snmp–control—To add this statement to the configuration.
interval seconds;
[edit snmp health-monitor]
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Interval between samples.
seconds —Time between samples, in seconds.
Range: through
1 2147483647
Default: seconds
300
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Interval
seconds
Copyright © 2010, Juniper Networks, Inc.