Tag-List - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

tag
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

tag-list

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
tag tag-name;
[edit snmp v3 notify name],
[edit snmp v3 snmp-community community-index]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a set of targets to receive traps or informs (for IPv4 packets only).
—Identifies the address of managers that are allowed to use a community
tag-name
string.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Tag
Configuring the SNMPv3 Trap Notification
tag-list tag-list;
[edit snmp v3 target-address target-address-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an SNMP tag list used to select target addresses.
—Defines sets of target addresses. To specify more than one tag, specify the tag
tag-list
names as a space-separated list enclosed within double quotes.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Trap Target Address
Chapter 140: SNMP
3949