Xerox ColorQube 9303 Series Service Manual page 56

– T1 feed / elevator motor MOT71-002,
– T2 feed / elevator motor MOT72-001,
– T3 feed motor MOT73-001, PL 81.30 Item
– 3 tray transport motor MOT70.025,
– Tray up limit switch, S73-384,
– Tray 3 elevate motor, MOT73-002,
• Repair the wiring as necessary, REP 1.1
• If necessary, install a new 3 tray module PWB,
Drum Driver PWB
• To view the +24V distribution from the
• For +24V faults on the drum driver
– WD 9.1
– WD 9.2
• The components that follow are driven from +24V from the
– Drum fan MOT42-064, PL 94.20 Item
– Cleaning unit delivery pump, part of
– Cleaning unit return reservoir pump, part of
– Cleaning unit PWB, part of PL 94.10 Item
• Repair the wiring as necessary, REP
• If necessary, install a new drum driver PWB,
Tray 5 Control PWB
• To view the +24V distribution from the
• For +24V faults on the tray 5 control
– WD 7.1.
– WD 7.2.
• The components that follow are driven from +24V from the
– Tray 5 transport motor MOT75.018,
– Elevator motor MOT75-019, PL 75.68 Item
– Upper limit switch S75-412, PL 75.68 Item
– Tray down limit switch S75-415,
– Feed motor MOT75-117, PL 81.40 Item
• Repair the wiring as necessary, REP
• If necessary, install a new tray 5 control PWB,
LCSS PWB
• To view the +24V distribution from the LCSS power supply module, refer to
• For +24V faults on the LCSS, refer to:
– WD 12.1
– WD 12.3
– WD 12.4
– WD 12.5
• The components that follow are driven from +24V from the
– Docking interlock switch S12-177,
– Front door interlock switch S12-303,
Status Indicator RAPs
01H
PL 81.25 Item 22.
PL 81.26 Item 22.
22.
PL 73.16 Item 3.
PL 81.30 Item 25.
PL 73.16 Item 2.
PL 73.16 Item 4
power supply unit, refer to WD 1.5
PWB, refer to:
drum driver PWB:
4.
PL 94.10 Item 21.
PL 94.10 Item 21.
21.
1.1.
PL 1.15 Item 4.
media path driver PWB, refer to WD
PWB, refer to:
tray 5 control PWB:
PL 81.40 Item 2.
4.
12.
PL 75.70 Item 2.
3.
1.1.
PL 75.68 Item 8.
LCSS PWB:
PL 12.15 Item 2.
PL 12.75 Item 5.
– Transport motor 1 MOT12-223,
– SH1 motor MOT12-247, part of
– SU1 motor MOT12-249, part of
– Transport motor 2 MOT12-224,
– Paddle roll motor MOT12-237,
– Punch head motor MOT12-243,
– Front tamper motor MOT12-226, part of
– Rear tamper motor MOT12-227, part of
– Bin 1 upper limit switch S12-190,
– Top cover interlock switch S12-197,
– Bin 1 lower limit switch S12-191,
– Bin 1 elevator motor MOT12.-241,
• Repair the wiring as necessary,
• If necessary, install a new LCSS PWB,
HVF PWB
• To view the +24V distribution from the HVF power supply module, refer to
• For +24V faults on the HVF, refer to:
– WD 12.6
– WD 12.7
– WD 12.8
– WD 12.9
8.4. – WD 12.10
– WD 12.13
– WD 12.14
– WD 12.15
• The components that follow are driven from +24V from the
– Transport motor 1 MOT12-223,
– Buffer motor MOT12-262,
– Nip split motor MOT12-164,
– Transport motor 2 MOT12-224,
– BM diverter solenoid SOL12-258,
– Exit diverter solenoid SOL12-225,
– Bypass feed motor MOT12-263,
– Set clamp solenoid SOL12-056,
WD 12.1. – Docking interlock switch S12-177,
– Front door interlock switch S12-303,
– Top cover interlock switch S12-197,
– Paddle unit motor MOT12-239,
– Paddle roll motor MOT12-238, part of
– Paper pusher motor MOT12-265,
– Bin 1 elevator motor MOT12-241,
– Stapler gate safety switch S12-319,
– Rear tamper motor MOT12-227,
February 2013
2-32
PL 12.40 Item 2.
PL 12.55 Item 5.
PL 12.55 Item 5.
PL 12.60 Item 5.
PL 12.25 Item 10.
PL 12.20 Item 2.
PL 12.45 Item 1.
PL 12.45 Item 1.
PL 12.30 Item 3.
PL 12.75 Item 6.
PL 12.35 Item 1.
PL 12.30 Item 8.
REP 1.1.
PL 12.75 Item 1.
HVF PWB:
PL 12.120 Item 2.
PL 12.120 Item 1.
PL 12.125 Item 15.
PL 12.120 Item 1.
PL 12.120 Item 4.
PL 12.120 Item 4.
PL 12.120 Item 2.
PL 12.120 Item 4.
PL 12.100 Item 16.
PL 12.115 Item 28.
PL 12.115 Item 24.
PL 12.120 Item 6.
PL 12.115 Item 2.
PL 12.115 Item 13.
PL 12.105 Item 10.
PL 12.115 Item 17.
PL 12.110 Item 19.
ColorQube® 9303 Family
WD 12.6.