Description (Interface) - Allied Telesis IE220 Series Manual

I C
NTERFACE OMMANDS
( )
DESCRIPTION INTERFACE

description (interface)

Overview Use this command to add a description to a specific port or interface.
description <description>
Syntax
Mode Interface Configuration
Example The following example uses this command to describe the device that an interface
is connected to.
awplus#
awplus(config)#
awplus(config-if)#
Command Version 5.4.7-1.1: valid character set changed to printable ASCII characters
changes
C613-50644-01 Rev B
Parameter Description
<description>
Text describing the specific interface. Descriptions can contain any
printable ASCII characters (ASCII 32-126).
configure terminal
interface port1.0.2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
description Boardroom PC
457