Description (Interface) - Allied Telesis AT-x510-28GTX Command Reference Manual

I C
NTERFACE OMMANDS
( )
DESCRIPTION INTERFACE

description (interface)

Overview Use this command to add a description to a specific port or interface.
description <description>
Syntax
Mode Interface Configuration
Example The following example uses this command to describe the device that a switch
port is connected to.
awplus#
awplus(config)#
awplus(config-if)#
C613-50102-01 REV C
Parameter Description
<description>
Text describing the specific interface.
configure terminal
interface port1.0.2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
description Boardroom PC
390