Serial Port Configuration Commands - LEGRAND Server Technology PRO3X User Manual

enable / disable
activePoweredDryContactLimit
number2
muteOtherDoorHandle
enable / disable
▶
Examples:
config:# peripheralDevicesSetup
externalSensorsZCoordinateFormat freeForm
deviceAltitude 3
peripheralDeviceAutoManagement enable
activePoweredDryContactLimit 2
muteOtherDoorHandle disable

Serial Port Configuration Commands

A serial port configuration command begins with serial.
Setting the Baud Rates
The following commands set the baud rate (bps) of the serial port labeled CONSOLE / MODEM on the
PRO3X device. Change the baud rate before connecting it to the desired device, such as a computer, a
Raritan's P2CIM‑SER, or a modem, through the serial port, or there are communications errors. If you
change the baud rate dynamically after the connection has been made, you must reset the PRO3X or
power cycle the connected device for proper communications.
Enter one of these
values
Keyword You need either 'Change Peripheral Device
Configuration' privilege or 'Administrator
Privileges'.
Enter an integer An "active" actuator is turned ON, or, if with a
number from 0 - 24. door handle connected, is OPENED.
Keyword
Enter one of these
values
461