Individual Sensor/Actuator Pages - LEGRAND Server Technology PRO3X User Manual

• • Select "Automatically assign a sensor number" to assign an unused ID number. This method does
not release any managed sensor or actuator.
• Select "Manually select a sensor number" to select a desired ID number from the list. Selecting an •
ID already in use will release the sensor currently managed with that ID. IDs already in use show
the sensor package's serial number. Available IDs show "unused."
4) Click Manage.
▶
Special note for Legrand humidity sensors:
A Legrand humidity sensor is able to provide two measurements - relative and absolute humidity
values.
• •
A relative humidity value is measured in percentage (%).
• •
An absolute humidity value is measured in grams per cubic meter (g/m
However, only relative humidity sensors are "automatically" managed if the automatic management
function is enabled. You must "manually" manage absolute humidity sensors as needed.
Note: Relative and absolute values of the same humidity sensor do NOT share the same ID number
though they share the same serial number and position.

Individual Sensor/Actuator Pages

A sensor's or actuator's data/setup page is opened after clicking any sensor or actuator name on the
Peripheral Devices page.
Note that only a numeric sensor has threshold settings, while a state sensor or actuator has no
thresholds.
3
).
141