Existing User Profiles - LEGRAND Server Technology PRO3X User Manual

▶
One Radius server's settings:
To show the configuration of a specific Radius server, assign the desired Radius server with its
sequential number in the command. To get detailed information, add "details" to the end of the
command.
# show authentication radiusServer <server_num>
-- OR--
# show authentication radiusServer <server_num> details
Variables:
• •
<server_num> is the sequential number of the specified authentication server on the LDAP or
Radius server list.
Displayed information:
• •
Without specifying any server, PRO3X shows the authentication type and a list of both LDAP and
Radius servers that have been configured.
• • When specifying a server, only that server's basic configuration is displayed, such as IP address and
port number.
• •
With the parameter "details" added, detailed information of the specified server is displayed, such
as an LDAP server's bind DN and the login name attribute, or a Radius server's timeout and retries
values.

Existing User Profiles

This command shows the data of one or all existing user profiles.
# show user <user_name>
To show detailed information, add the parameter "details" to the end of the command.
#
show user <user_name> details
348