LEGRAND Server Technology PRO3X User Manual page 448

▶
Set the assertion timeout for an outlet group sensor:
config:# sensor outletgroup <ID> <sensor type> assertionTimeout <as_value>
Variables:
• • <ID> is an outlet group's index number.
• •
<sensor type> is one of the following sensor types:
Sensor type
activePower
activeEnergy
For definitions on an outlet group's sensors, see Outlet Groups.
• • <option> is one of the options: enable, disable or a numeric value.
Option
enable
disable
A numeric
value
• • <hy_value> is a numeric value that is assigned to the hysteresis for the specified group sensor of the
chosen outlet group.
• •
<as_value> is a number in samples that is assigned to the assertion timeout for the specified group
sensor of the chosen outlet group.
Commands for Inlet Sensors
A sensor configuration command for inlets begins with sensor inlet.
You can configure various inlet sensor threshold settings at a time by combining multiple commands.
▶
Set the Upper Critical threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperCritical <option>
448
Description
An outlet group's active power sensor
An outlet group's active energy sensor
Description
Enables the specified threshold for a specific group sensor of the
chosen outlet group.
Disables the specified threshold for a specific group sensor of the
chosen outlet group.
Sets a value for the specified threshold of the chosen outlet
group's specific group sensor, and enables this threshold at the
same time.