Device Configuration Commands - LEGRAND Server Technology PRO3X User Manual

▶
To enter configuration mode:
1) Ensure you have entered administrator mode and the # prompt is displayed.
2) Type config and press Enter.
3) The config:# prompt appears, indicating that you have entered configuration mode.
4) Now you can type any configuration command and press Enter to change the settings.
Important: To apply new configuration settings, you must issue the "apply"
command before closing the terminal emulation program. Closing the program does
not save any configuration changes.
▶
To quit the configuration mode, use either "apply" or "cancel" command:
config:#
-- OR --
config:#
The # or > prompt appears after pressing Enter, indicating that you have entered the administrator or
user mode.

Device Configuration Commands

Device configuration command begins with <device-name>. You can use the <device-name>
configuration commands to change the settings that apply to the whole device. You must insert your
specific <device-name> as shown.
• •
SRC <device-name>: src.
• •
All PDUs and Transfer Switches <device-name>: pdu.
Configuration commands are case sensitive so ensure you capitalize them correctly.
Changing the Device Name
config:# <device-name> name "<name>"
Variables:
• •
<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be
enclosed in quotes when it contains spaces.
You must insert your specific <device-name> as shown:
apply
cancel
Device Configuration Commands (on page 355)
355