LEGRAND Server Technology PRO3X User Manual page 159

• •
LDAP
• • NTP
• •
SMTP
• •
SSH
• •
Telnet
• •
FTP
• • SSL/TLS
• •
SNMP
• •
SysLog
Note: PRO3X disables TLS 1.0 and 1.1 by default. It enables only TLS 1.2 and 1.3.
Common Network Settings
Common Network Settings are OPTIONAL, not required. Therefore, leave them unchanged if there are
no specific local networking requirements.
Field Description
Leave it to the default "None" unless you are establishing a
Cascading
cascading chain.
mode
• •
Setting the Cascading Mode
DNS resolver Determine which IP address is used when the DNS resolver returns
preference both IPv4 and IPv6 addresses.
• •
IPv4 address: Use the IPv4 addresses.
• •
IPv6 address: Use the IPv6 addresses.
DNS suffixes Specify a DNS suffix name if needed.
(optional)
(on page 173)
159