LEGRAND Server Technology PRO3X User Manual page 238

Some actions have messages that you can customize using placeholders that will populate with specific
information when the message is generated. Custom messages with placeholders can be used in these
actions: Log event message, Send SMS, Send email (subject+body), Send webcam image (subject+body).
▶
To test an action:
• •
Click the Test button next to the Action. The action is triggered and you can verify it.
▶
Built-in actions:
• •
System Event Log Action:
This action records the selected event in the internal log when the event occurs.
• •
System SNMP Notification Action:
This action sends SNMP notifications to one or multiple IP addresses after the selected
event occurs.
Note: No IP addresses are specified for this notification action by default so you must enter IP
addresses before applying this action to any event rule. Any changes made to the 'SNMP
Notifications' section on the SNMP page will update the settings of the System SNMP Notification
Action, and vice versa.
• •
System Tamper Alarm:
This action causes the PRO3X to show the alarm for the tamper sensor, if any, on the
Dashboard page until a person acknowledges it. By default, this action has been assigned
to the built-in tamper detection event rules.
▶
Actions you can create:
1) Choose Device Settings > Event Rules > New Action.
2) Click the Action field to select an action type from the list.
238