LEGRAND Server Technology PRO3X User Manual page 372

▶
Set the EAP identity:
config:# network ethernet <ETH> eapIdentity <identity>
▶
Set the EAP password:
config:#
After performing the above command, the PRO3X prompts you to enter the password. Then type the
password and press Enter.
▶
Provide a client certificate for authentication set to "EAP + TLS" or "EAP + PEAP + TLS":
config:#
After performing any certificate or private key commands, including commands for the client certificate,
client private key, and CA certificate, the system prompts you to enter the contents of the wanted
certificate or key. For an example with detailed procedure, see
374).
▶
Provide a client private key for authentication set to "EAP + TLS" or "EAP + PEAP + TLS":
config:#
▶
Provide a CA TLS certificate for EAP:
config:#
▶
Eable or disable verification of the TLS certificate chain:
config:# network ethernet <ETH> enableCertVerification <option1>
▶
Allow expired and not yet valid TLS certificates:
config:# network ethernet <ETH> allowOffTimeRangeCerts <option2>
372
network ethernet <ETH> eapPassword
network ethernet <ETH> eapClientCertificate
network ethernet <ETH> eapClientPrivateKey
network ethernet <ETH> eapCACertificate
EAP CA Certificate Example (on page