LEGRAND Server Technology PRO3X User Manual page 309

The structure of a snapshots folder looks similar to the diagram below.
Number Folder name description
User-defined parent directory, whose name depends your server settings, such as
your FTP configuration.
Serial number of your PRO3X device where the webcam is connected. For
example, PH85350018.
• • View your serial number in Device Information.
The name of the webcam that your PRO3X detects first.
This is the folder where the snapshots captured by the first webcam are stored.
• • The first webcam's default name is "Webcam".
• •
You can customize the webcam's name, which will change the snapshots
folder's name.
• •
If the webcam's location is important, you can customize the webcam's name
based on its location when configuring PRO3X to save snapshots onto a
remote server.
The name of the webcam that your PRO3X detects later, if an additional webcam
is connected.
This is the folder where the snapshots captured by the second webcam are
stored.
• • The second webcam's default name is "Webcam 2".
• •
Changing this webcam's name also changes the second snapshots folder's
name.
• •
If the webcam's location is important, you can customize the webcam's name
based on its location when configuring PRO3X to save snapshots onto a
remote server.
Note: It is suggested to customize a webcam's name "prior to" saving snapshots on the remote server.
In case you change the webcam's name after saving any snapshots, PRO3X will create a new folder with
the new webcam name while keeping the old folder with the old name.
SmartLock and Card Reader
Raritan's SmartLock kits provide several cabinet access control solutions.
309