Resetting All Settings To Factory Defaults - LEGRAND Server Technology PRO3X User Manual

2) Click Reboot.
3) A message appears, with a countdown timer showing the remaining time of the operation. It takes
about one minute to complete.
4) When the restart is complete, the login page opens.
Tip: If you are not redirected to the login page after the restart is complete, click the text "this link" in
the countdown message.
Note: Device reset will cause CLI communications over an "USB" connection to be lost. Therefore, re-
connect the USB cable after the reset is complete.

Resetting All Settings to Factory Defaults

You must have the Administrator Privileges to reset all settings to factory defaults.
Resetting to factory default can also be completed in the CLI or with a Reset button on the unit. See
Resetting to Factory Defaults
Important: Exercise caution before resetting to factory defaults. This erases
existing information and customized settings, such as user profiles, threshold
values, and so on. Only active energy data and firmware upgrade history are
retained.
▶
To reset the device to factory defaults:
1) Choose Maintenance > Unit Reset > Reset to Factory Defaults.
300
(on page )