LEGRAND Server Technology PRO3X User Manual page 385

Option
passwordOrPublicKey Enables both the password- and public key-based login.
If the public key authentication is selected, you must enter a valid SSH public key for each user profile to
log in over the SSH connection.
Setting the SNMP Configuration
You can enable or disable the SNMP v1/v2c or v3 agent, configure the read and write community
strings, or set the MIB-II parameters, such as sysContact, using the CLI commands.
An SNMP command begins with network services snmp.
▶
Enabling or Disabling SNMP v1/v2c
This command enables or disables the SNMP v1/v2c protocol.
config:# network services snmp v1/v2c <option>
Variables:
• •
<option> is one of the options: enable or disable.
Option Description
enable The SNMP v1/v2c protocol is enabled.
disable The SNMP v1/v2c protocol is disabled.
▶
Enabling or Disabling SNMP v3
This command enables or disables the SNMP v3 protocol.
config:# network services snmp v3 <option>
Variables:
• •
<option> is one of the options: enable or disable.
Option Description
enable The SNMP v3 protocol is enabled.
Description
This is the default.
385