LEGRAND Server Technology PRO3X User Manual page 371

config:# network ethernet <interface> [enabled
<enabled>]
The following command sets the authentication method for the selected Ethernet interface to either
none or Extensible Authentication Protocol (EAP).
config:# network ethernet <ETH> authMethod <method>
Variables:
• •
<ETH> is one of the options -- eth1 or eth2.
Option
eth1
eth2
• •
<method> is one of the authentication methods: NONE or EAP.
Method Description
NONE The authentication method is set to NONE.
EAP The authentication method is set to EAP.
Setting Ethernet EAP Parameters
When the selected Ethernet interface's authentication method is set to EAP, you must configure EAP
authentication parameters, including outer authentication, inner authentication, EAP identity, client
certificate, client private key, password, CA certificate, and RADIUS authentication server. For more
information, see Ethernet Interface Settings.
▶
Determine the outer authentication protocol:
config:# network ethernet <ETH> eapOuterAuthentication <outer_auth>
▶
Determine the inner authentication protocol for authentication set to "EAP + PEAP":
config:# network ethernet <ETH> eapInnerAuthentication <inner_auth>
Description
ETH1 port
ETH2 port
371