LEGRAND Server Technology PRO3X User Manual page 380

Option Description
false The network connection is NOT successfully established when the PRO3X
finds that the TLS certificate is not valid due to incorrect system time.
• •
<FQDN> is the name of the RADIUS server if it is present in the TLS certificate. The name must
match the fully qualified domain name (FQDN) of the host shown in the certificate.
Setting the BSSID
This command specifies the BSSID.
config:#
Variables:
• •
<bssid> is either the MAC address of the wireless access point or none for automatic selection.
Setting the Wireless MTU
This command sets the MTU for the wireless interface.
config:#
Variables:
• •
<mtu> is the Maximum Transfer Unit. Enter a value from 1280-1500.
Configuring the Cascading Mode
This command determines the cascading mode.
config:# network <mode> enabled <option1>
Variables:
• • <mode> is one of the following cascading modes.
Mode
bridge
380
network wireless BSSID <bssid>
network wireless mtu<mtu>
Description
The Bridging mode, where each cascaded device is assigned a
unique IP address.