Variables:
•
•
<n> is the ID number of the environmental sensor that you want to configure. The ID number is
available in the PRO3X web interface or using the command "show externalsensors <n>" in
the CLI. It is an integer starting at 1.
•
•
<coordinate> is a string comprising up to 24 ASCII printable characters, and it must be enclosed in
quotes.
Setting the Y Coordinate
This command specifies the Y coordinate of an environmental sensor.
config:#
externalsensor <n> ylabel "<coordinate>"
Variables:
•
•
<n> is the ID number of the environmental sensor that you want to configure. The ID number is
available in the PRO3X web interface or using the command "show externalsensors <n>" in
the CLI. It is an integer starting at 1.
•
•
<coordinate> is a string comprising up to 24 ASCII printable characters, and it must be enclosed in
quotes.
Setting the Z Coordinate
This command specifies the Z coordinate of an environmental sensor.
config:#
externalsensor <n> zlabel "<coordinate>"
Variables:
•
•
<n> is the ID number of the environmental sensor that you want to configure. The ID number is
available in the web interface or using the command "show externalsensors <n>" in the
CLI. It is an integer starting at 1.
•
•
Depending on the Z coordinate format you set, there are two types of values for the <coordinate>
variable:
Type
Description
Free form <coordinate> is a string comprising up to 24 ASCII printable
characters, and it must be enclosed in quotes.
Rack units <coordinate> is an integer number in rack units.
Changing the Sensor Description
This command provides a description for a specific environmental sensor.
441
Need help?
Do you have a question about the Server Technology PRO3X and is the answer not in the manual?