LEGRAND Server Technology PRO3X User Manual page 423

a. a. Open your SSH public key with a text editor.
b. b. Copy all contents in the text editor.
c. Paste the contents into the terminal. c.
d. Press Enter. d.
▶
To remove an existing SSH public key:
1) Type the same command as shown above.
2) When the system prompts you to input the contents, press Enter without typing or pasting anything.
▶
Example
The following procedure illustrates how to change the SSH public key for the user "assistant."
1) Verify that you have entered the configuration mode.
2) Type the following command and press Enter.
config:# user modify assistant sshPublicKey
3) You are prompted to enter a new SSH public key.
4) Type the new key and press Enter.
Deleting a User Profile
This command deletes an existing user profile.
config:#
Changing Your Own Password
Every user can change their own password via this command if they have the Change Own Password
privilege. Note that this command does not begin with user.
config:#
After performing this command, the system prompts you to enter both current and new passwords
respectively.
Important: After the password is changed successfully, the new password is
effective immediately whether or not you type the command "apply" to save the
changes.
▶
Example
This procedure changes your own password:
user delete <name>
password
423