LEGRAND Server Technology PRO3X User Manual page 452

Option
enable
disable
A numeric
value
• • <hy_value> is a numeric value that is assigned to the hysteresis for the specified inlet pole sensor.
• •
<as_value> is a number in samples that is assigned to the assertion timeout for the specified inlet
pole sensor.
Commands for Overcurrent Protector Sensors
A sensor configuration command for overcurrent protectors begins with sensor ocp.
You can configure various overcurrent protector threshold settings at a time by combining multiple
commands.
▶
Set the Upper Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperCritical <option>
▶
Set the Upper Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperWarning <option>
▶
Set the Lower Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerCritical <option>
▶
Set the Lower Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerWarning <option>
▶
Set the deassertion hysteresis for an overcurrent protector:
config:# sensor ocp <n> <sensor type> hysteresis <hy_value>
452
Description
Enables the specified threshold for the specified inlet pole
sensor.
Disables the specified threshold for the specified inlet pole
sensor.
Sets a value for the specified threshold of the specified inlet
pole sensor and enables this threshold at the same time.