LEGRAND Server Technology PRO3X User Manual page 375

5) Select and copy the contents as illustrated below, including the starting line containing "BEGIN
CERTIFICATE" and the ending line containing "END CERTIFICATE."
6) Paste the contents in the terminal.
7) Press Enter.
8) Verify whether the system shows the following command prompt, indicating the provided CA
certificate is valid.
config:#
Removing the Uploaded Certificate or Private Key
The procedures of removing an existing client certificate, client private key or CA certificate in CLI are
similar.
This section illustrates such a procedure for the Ethernet interface "ETH1."
▶
To remove a certificate or private key for ETH1:
1) Make sure you have entered the configuration mode.
2) Type the appropriate command, depending on which file you want to remove, and press Enter.
• • Client certificate:
config:# network ethernet eth1 eapClientCertificate
• • Client private key:
config:# network ethernet eth1 eapClientPrivateKey
• • CA certificate:
config:#
3) The system prompts you to enter the contents of the chosen certificate or private key.
4) Press Enter without typing any data.
5) Verify whether the system shows the following command prompt, indicating the existing certificate
or private key has been removed.
config:#
network ethernet eth1 eapCACertificate
375