Network Configuration Commands - LEGRAND Server Technology PRO3X User Manual

Variables:
• •
<outlets1> is one or multiple outlet numbers to be set as critical outlets. Use commas to separate
outlet numbers.
Use a dash for a range of consecutive outlets. For example,
• •
<outlets2> is one or multiple outlet numbers to be set as NON‑critical outlets. Use commas to
separate outlet numbers.
Use a dash for a range of consecutive outlets. For example,
Enabling or Disabling Data Logging
This command enables or disables the data logging feature.
config:# <device-name> dataRetrieval <option>
You must insert your specific <device-name> as shown:
Variables:
• •
<option> is one of the options: enable or disable.
Option Description
enable Enables the data logging feature.
disable Disables the data logging feature.
For more information, see Setting Data Logging.
Setting Data Logging Measurements Per Entry
This command defines the number of measurements accumulated per log entry.
config:# <device-name> measurementsPerLogEntry
<number>
You must insert your specific <device-name> as shown:
Variables:
• •
<number> is an integer between 1 and 600. The default is 60 samples per log entry.

Network Configuration Commands

A network configuration command begins with network. A number of network settings can be changed
through the CLI, such as the IP address, transmission speed, duplex mode, and so on.
3-8 represents outlets 3 to 8.
3-8 represents outlets 3 to 8.
Device Configuration Commands
Device Configuration Commands
(on page 355)
(on page 355)
359