Load Shedding Settings; Serial Port Settings; Event Log - LEGRAND Server Technology PRO3X User Manual

Displayed information:
• •
Role settings are displayed, including the role description and privileges.

Load Shedding Settings

This section applies to outlet-switching capable models only.
This command shows the load shedding settings.
# show loadshedding
Displayed information:
• • The load shedding state is displayed along with non‑critical outlets.
Note: The load shedding mode is associated with critical and non-critical outlets. To specify critical and
non-critical outlets through CLI, see

Serial Port Settings

This command shows the baud rate setting of the serial port labeled CONSOLE / MODEM on the PRO3X.
# show serial

Event Log

The command used to show the event log begins with show eventlog. You can add either the limit
or class parameters or both to show specific events.
▶
Show the last 30 entries:
# show eventlog
▶
Show a specific number of last entries in the event log:
# show eventlog limit <n>
▶
Show a specific type of events only:
# show eventlog class <event_type>
350
Specifying Non-Critical Outlets (on page 358).