Power Control Operations - LEGRAND Server Technology PRO3X User Manual

Power Control Operations

This section applies to outlet-switching capable models only.
Outlets can be turned on or off, or power cycled through the CLI.
You can also cancel the power-on process while the system is powering on ALL outlets.
You must perform this operation in the administrator mode.
Turning On the Outlet(s)
This section applies to outlet-switching capable models only.
This command turns on one or multiple outlets.
# power outlets <numbers> on
To quicken the operation, you can add the parameter "/y" to the end of the command, which confirms
the operation.
#
power outlets <numbers> on /y
Variables:
• • <numbers> is one of the options: all, an outlet number, a list or a range of outlets.
Option
all
A specific outlet
number
A comma- separated
list of outlets
464
Description
Switches ON all outlets.
Switches ON the specified outlet.
Switches ON multiple, inconsecutive or consecutive
outlets.
For example, to specify 7 outlets -- 2, 4, 9, 11, 12, 13 and
15, type:
outlets 2,4,9,11-13,15.