Viewing Firmware Update History; Bulk Configuration - LEGRAND Server Technology PRO3X User Manual

Downgrade Firmware (not supported)
Safety measures are added to prevent the downgrade of the PRO3X. You will see compatibility warnings
about the older firmware version after uploading the firmware. A downgraded device may not function
properly, and it may lose settings.
WARNING: Downgrades are not officially supported and must be discussed in
advance with Technical Support.

Viewing Firmware Update History

The firmware upgrade history is permanently stored. It remains available even though you perform a
device reboot or any firmware update.
▶
To view the firmware update history:
1) Choose Maintenance > Firmware History.
Each firmware update event consists of:
• Update date and time •
• • Previous firmware version
• Update firmware version •
• • Update result

Bulk Configuration

The Bulk Configuration feature lets you save generic settings of a configured PRO3X device to your
computer. You can use this configuration file to copy settings to other devices of the same model and
firmware version.
A source device is the PRO3X device where the configuration file is downloaded/saved. A target device
is the PRO3X device that loads the configuration file.
By default the configuration file downloaded from the source device contains settings based on the
built-in bulk profile. The built-in bulk profile defines that all settings should be saved except for
device‑specific settings, such as IP address or environmental sensor settings. If you need to load these
device-specific settings, you should use the Backup/Restore feature instead.
You can decide which settings are downloaded by creating your own bulk configuration profile.
292