LEGRAND Server Technology PRO3X User Manual page 444

▶
Set the Default Assertion Timeout for a specific sensor type:
config:# defaultThresholds <sensor type> assertionTimeout <as_value>
Variables:
• • <sensor type> is one of the following numeric sensor types:
Sensor types
absoluteHumidity
relativeHumidity
temperature
airPressure
airFlow
vibration
• •
<value> is the value for the specified threshold of the specified sensor type. Note that diverse
sensor types use different measurement units.
Sensor types
absoluteHumidity g/m^3 (that is, g/m
relativeHumidity
temperature
airPressure
airFlow
vibration
• •
<hy_value> is the deassertion hysteresis value applied to the specified sensor type.
• •
<as_value> is the assertion timeout value applied to the specified sensor type. It ranges from 0 to
100 (samples).
444
Description
Absolute humidity sensors
Relative humidity sensors
Temperature sensors
Air pressure sensors
Air flow sensors
Vibration sensors
Measurement units
3
)
%
Degrees Celsius (°C) or Fahrenheit (°F), depending on your
measurement unit settings.
Pascal (Pa) or psi, depending on your measurement unit settings.
m/s
g