Resetting Energy Readings - LEGRAND Server Technology PRO3X User Manual

▶
To restart the PRO3X:
1) Ensure you have entered administrator mode and the # prompt is displayed.
2) Type either of the following commands to restart the PRO3X.
# reset unit
-- OR --
#
reset unit /y
3) If you entered the command without "/y" in Step 2, a message appears prompting you to confirm
the operation. Type y to confirm the reset.
4) Wait until the reset is complete.
Note: Device reset will cause CLI communications over an "USB" connection to be lost. Therefore, re-
connect the USB cable after the reset is complete.

Resetting Energy Readings

You can reset either one energy sensor or all energy sensors at a time to restart the energy
accumulation process.
Only users with the "Admin" role assigned can reset energy readings.
▶
To reset all energy counters:
All counters includes inlets, outlets, and PDU (for multi-inlet models).
# reset energy pdu
-- OR --
# reset energy pdu /y
▶
To reset one inlet's energy readings:
# reset energy inlet <n>
-- OR --
# reset energy inlet <n> /y
470