LEGRAND Server Technology PRO3X User Manual page 211

3) The New Door Access Rule page opens. Enter a name for the rule. 128 characters maximum.
4) Select the door locks this rule applies to in the Available Door Handle Locks list. Each selected door
lock appears in the Selected Locks section.
5) To allow authorization via card reader, select the Card Access checkbox, then select the correct Card
Reader and click Read Card to retrieve the Card ID. Card IDs are hidden for security. Click the eyeball
icon to reveal and verify the Card ID.
6) To allow Authorization via Keypad, select the Keypad Access checkbox, then select the correct
keypad and enter the PIN. PINs are hidden for security. Click the eyeball icon to reveal and verify the
PIN. PIN length varies by keypad, and a minimum PIN length of 4 is required.
7) When both Card and Keypad authorization are required, the Two-Factor Configuration controls are
required. Enter a Timeout in seconds during which both Card and Keypad authorization must occur.
211