LEGRAND Server Technology PRO3X User Manual page 215

▶
Event rule configuration illustration:
1) Choose Device Settings > Event Rules > New Rule.
2) Click the Event field to select an event type.
• <Any sub-event> means all events shown on the list. •
• <Any Numeric Sensor> means all numeric sensors, including internal and environmental sensors. •
<Any Numeric Sensor> is especially useful if you want to receive the notifications when any
numeric sensor's readings pass through a specific threshold.
3) In this example, the Peripheral Device Slot is selected, which is related to the environmental sensor
packages. Then a sensor ID field for this event type appears. Click this additional field to specify
which sensor should be the subject of this event.
4) In this example, sensor ID 3 (Slot 3) is selected, which is a temperature sensor. Then a new field for
this sensor appears. Click this field to specify the type of event(s) you want.
5) In this example, Numeric Sensor is selected because we want to select numeric-sensor-related
event(s). Then a field for numeric-sensor-related events appears. Click this field to select one of the
numeric-sensor-related events from the list.
215