Snmp Gets And Sets; The Mib File - LEGRAND Server Technology PRO3X User Manual

▶
MIB download via the Device Information page:
1) Choose Maintenance > Device Information.
2) In the Information section, click the desired download link:
• • PDU2-MIB
• • ASSETMANAGEMENT‑MIB
3) Click Save to save the file onto your computer.

SNMP Gets and Sets

In addition to sending notifications, the PRO3X is able to receive SNMP get and set requests from third-
party SNMP managers.
• •
Get requests are used to retrieve information about the PRO3X, such as the system location, and
the current on a specific outlet.
• •
Set requests are used to configure a subset of the information, such as the SNMP system name.
Note: The SNMP system name is the PRO3X device name. When you change the SNMP system name,
the device name shown in the web interface is also changed.
The PRO3X does NOT support configuring IPv6-related parameters using the SNMP set
requests.
Valid objects for these requests are limited to those found in the SNMP MIB‑II System Group and the
custom PRO3X MIB.

The MIB File

An SNMP MIB file describes the SNMP functions.
Opening the MIB reveals the custom objects that describe the PRO3X system at the unit level as well as
at the individual-outlet level.
As standard, these objects are first presented at the beginning of the file, listed under their parent
group. The objects then appear again individually, defined and described in detail.
321