Serial Port Configuration Commands - LEGRAND Server Technology PRO4X User Manual

enable / disable
activePoweredDryContactLimit
number2
muteOtherDoorHandle
enable / disable
▶
Examples:
config:# peripheralDevicesSetup
externalSensorsZCoordinateFormat freeForm
deviceAltitude 3
peripheralDeviceAutoManagement enable
activePoweredDryContactLimit 2
muteOtherDoorHandle disable

Serial Port Configuration Commands

A serial port configuration command begins with serial.
Forcing the Device Detection Mode
This command forces the serial port on the PRO4X to enter a specific device detection mode.
config:# serial deviceDetectionType <mode>
Variables:
• •
<mode> is one of the detection modes: automatic, forceConsole, forceAnalogModem, or
forceGsmModem.
Enter one of these
values
Keyword You need either 'Change Peripheral Device
Configuration' privilege or 'Administrator
Privileges'.
Enter an integer An "active" actuator is turned ON, or, if with a
number from 0 - 24. door handle connected, is OPENED.
Keyword
Enter one of these
values
521