LEGRAND Server Technology PRO3X User Manual page 168

Field/setting
Allow expired and
not yet valid
certificates
Allow connection
if system clock is
incorrect
▶
IPv4 settings:
Field/setting
Enable IPv4
IP auto configuration
Preferred hostname
• •
DHCP settings: Optionally specify the preferred hostname, which must meet the following
requirements:
• Consists of alphanumeric characters and/or hyphens •
• Cannot begin or end with a hyphen •
• Cannot contain more than 63 characters •
• • Cannot contain punctuation marks, spaces, and other symbols
• •
Static settings: Assign a static IPv4 address, which follows this syntax "IP address/prefix length".
192.168.84.99/24
Example:
▶
IPv6 settings:
Field/setting
Enable IPv6
IP auto configuration
168
Description
• •
Select this checkbox to make the authentication succeed
regardless of the certificate's validity period.
• •
After deselecting this checkbox, the authentication fails
whenever any certificate in the selected certificate chain is
outdated or not valid yet.
When this checkbox is deselected, and if the system time is
incorrect, the installed TLS certificate is considered not valid yet
and will cause the wireless network connection to fail.
When this checkbox is selected, it will make the wireless network
connection successful when the PRO3X system time is earlier than
the firmware build before synchronizing with any NTP server.
Description
Enable or disable the IPv4 protocol.
Select the method to configure IPv4 settings.
• • DHCP: Auto-configure IPv4 settings via DHCP servers.
• •
Static: Manually configure the IPv4 settings.
Enter the hostname you prefer for IPv4 connectivity
Description
Enable or disable the IPv6 protocol.
Select the method to configure IPv6 settings.
• • Automatic: Auto-configure IPv6 settings via DHCPv6.
• •
Static: Manually configure the IPv6 settings.