LEGRAND Server Technology PRO3X User Manual page 332
Hide thumbs
Also See for Server Technology PRO3X:
- Network connection setup manual (4 pages) ,
- User manual (61 pages) ,
- User manual (183 pages)
Table of Contents
Advertisement
Note: In the bridging mode, only the IP parameters of the BRIDGE interface function. The IP
parameters of ETH1/ETH2 and WIRELESS interfaces do NOT function.
Interface Description
eth1
Show the IP-related configuration of the ETH1 interface.
eth2
Show the IP-related configuration of the ETH2 interface.
wireless
Show the IP-related configuration of the WIRELESS interface.
bridge
Show the IP-related configuration of the BRIDGE interface.
all
Show the IP-related configuration of all interfaces.
Tip: You can also type the command without adding this
option "all" to get the same data. That is, show network ip
interface.
IPv4-Only or IPv6-Only Configuration
To show IPv4-only or IPv6-only configuration, use any of the following commands.
▶
To show IPv4 settings shared by all network interfaces, such as DNS and routes:
#
show network ipv4 common
▶
To show IPv6 settings shared by all network interfaces, such as DNS and routes:
#
show network ipv6 common
▶
To show the IPv4 configuration of a specific network interface:
#
show network ipv4 interface <ETH>
▶
To show the IPv6 configuration of a specific network interface:
#
show network ipv6 interface <ETH>
332
Advertisement
Table of Contents
Need help?
Do you have a question about the Server Technology PRO3X and is the answer not in the manual?